FLEX GLUE® Super Strong, Rubberised, Waterproof Glue!
FEATURES
- Super strong, rubberised, waterproof glue
- Instantly bonds, seals and repairs virtually anything
- Powerful adhesive with amazing instant grab adhesive that works like a magnet, locks into place and holds on tight
- Can be used on dry or wet surfaces and even underwater – won’t crack, peel or shrink
- Unaffected by weather – works in all types of conditions
- Works on metal, wood, brick, tile, concrete and so much more!
- Perfect for all types of repairs, sealing leaks and DIY projects – no need for screws or nails
- Once fully cured it can be painted any colour
- Mould, mildew and UV resistant
- Solvent-free
- No run or drip for overhead applications
- Cures in 24-48 hours and reaches maximum strength in 7 days
- Pro Formula has even MORE instant grab - formulated for extra heavy-duty application
- Available in:
- Original Clear 118ml Squeeze Tube
- Original White 180ml Squeeze Tube
- Pro Formula Clear 270ml Cartridge
- Pro Formula White 300ml Cartridge
- Max Pro Formula White 828ml Cartridge
RECOMMENDED USES
FLEX GLUE® can be used in a variety of adhesive and sealant applications. The most common uses for FLEX GLUE® are listed below:
Common FLEX GLUE® Applications:
- Interior and exterior home repairs
- Seal out water and air
- Roof and siding repairs
- Bath and shower fixes
- Pool tile repairs
- Shoe repairs
- Furniture repairs
- DIY projects and hobbies
- Auto and boat repairs
- RV and motor home repairs
- Brick and stone bonding
Recommended surfaces:
- Metals
- Wood
- Foam
- Rubber
- Tile
- Ceramic
- Marble
- Porcelain
- Glass
- Granite
- Brick
- Concrete
- Stucco
- Plaster
- Stone
- Masonry
- Drywall
- Sheetrock
- Fibreglass
- Some plastics & vinyls, composites, PVC, EPS, EPDM roofs and so much more!
*Additional applications and substrates exist beyond this list. We recommend testing prior to use.
HOW TO USE
Always read and follow the instructions for use. For full instructions and safety directions see product packaging.
FLEX GLUE® Original Formula (Squeeze Tube)
- Surface must be free of grease, oil and dirt.
- Unscrew the nozzle and cut opening to desired length.
- Apply liberally to one side of the surface being bonded and apply firm pressure continuously for a minimum of 10-30 seconds for instant grab to take hold. In some applications, bracing may be required.
- If needed, you may reposition object within 10 minutes of application.
- Allow 24-48 hours for curing. Will reach maximum strength in 7 days.
FLEX GLUE® Pro Formula (Caulking Gun Cartridge)
- Surface must be free of grease, oil and dirt.
- Unscrew the nozzle and cut off tip, leaving thread intact.
- Replace nozzle and cut nozzle to the desired length.
- Insert cartridge into a standard size caulking gun and squeeze trigger (caulking gun not included)
- Apply liberally to one side of the surface being bonded and apply firm pressure continuously for a minimum of 10-30 seconds for instant grab to take hold. In some applications, bracing may be required.
- If needed, you may reposition object within 10 minutes of application.
- Allow 24-48 hours for curing. Will reach maximum strength in 7 days.
WARNING: May cause an allergic skin reaction. Avoid contact with eyes and skin. Wear gloves and safety glasses. KEEP OUT OF REACH OF CHILDREN.
FAQ
Q: What size and colours can I purchase FLEX GLUE® in?
FLEX GLUE® original is offered in a clear 118ml squeeze tube or a white 180ml squeeze tube. FLEX GLUE® Pro Formula is offered in a clear 270ml Cartridge, White 300ml Cartridge or Max White 828ml Cartridge.
Q: What is the difference between FLEX GLUE® in the squeeze tube vs. the Pro Formula Cartridge?
All sizes have amazing instant grab technology. However, the Pro Formula has even more instant grab and is formulated for extra heavy-duty applications.
Q: How do I clean up after using FLEX GLUE®?
Clean with a dry cloth. Most residues can be removed with isopropyl alcohol.
Q: What the temperatures can FLEX GLUE® be applied in?
For easy application, we recommend dispensing in temperatures between -17° & 65°C.
Q: What temperatures will FLEX GLUE® withstand?
FLEX GLUE® can withstand a wide range of temperatures, ranging from -56° up to 93°C.
Q: Can I smooth or tool FLEX GLUE® once it has been applied?
Yes, FLEX GLUE® can be tooled or re-positioned within 10 minutes of initial application.
Q: How long does FLEX GLUE® take to cure?
FLEX GLUE® fully cures in 24 – 48 hours and reaches maximum strength in seven days.
Q: Can I use FLEX GLUE® on dry or wet surfaces?
Yes, FLEX GLUE® can be applied on dry or wet surfaces and even underwater. It won’t crack, shrink or peel.
Q: Can FLEX GLUE® be painted?
Yes, once dry, FLEX GLUE® can be painted with a high-quality latex paint.
